From the fence line right through to the core of your site, when it comes to security, a robust solution that provides protection across all levels and areas of your site is essential.
The basis of protection for any site is – deter, detect, delay. Deter the intruder so they may choose not to proceed; if they do try, detect them immediately to initiate your security response; then delay progress as much as possible to enable intervention before significant damage occurs.
Gallagher Security provides several solutions to ensure a site is safe, secure, and compliant from the curb to core.
Gallagher Command Centre
Gallagher Command Centre is Gallagher's powerful software that delivers enterprise-grade Command and Control to manage your site and staff. From cardholder management to critical incident response, Command Centre is an essential business tool to configure, manage and report on all aspects of your security solution.
Command Centre is designed to integrate seamlessly with a wide variety of third-party systems and hardware, such as CCTV, IP intercoms, electronic key safes, Building Management Systems (BMS), Heating, Ventilation, and Air Conditioning (HVAC), and elevator systems. Command Centre provides a centralised management platform for these systems to help ensure the integrity of your site and the safety of your people.
Gallagher Perimeter Solutions
Perimeter security is an organisation’s first layer of defence. For example, at the initial perimeter layer you might have a monitored pulse fence system that offers powerful deterrence and detection.
Attempts to breach the perimeter are deterred by an energised pulse sent around the perimeter fence line. Monitored pulse fencing meets stringent safety criteria, while delivering a short but safe shock, making it almost impossible to climb the fence.
A networked perimeter solution incorporates sensors that continuously measure and report on wire tension and monitor fence structure vibration or movement. Sensors can be used with or without an energised pulse to detect intrusion without the intruder being aware.
When a fence sensor is triggered, an alarm will activate for that zone, allowing operators to immediately focus their attention where it’s most needed.
Gallagher has a range of Security Construction and Equipment Committee (SCEC) approved perimeter products, including the Perimeter Intrusion Detection System, and Monitored Pulsed Fence and Taught Wire System.
Gallagher Access Control
The next layer of your security solution could contain an access control solution, to ensure only authorised people can enter the workstation environment where sensitive information or assets are held. Gallagher’s powerful access control and intruder alarms solutions provide additional layers of protection, controlled from Command Centre.
Gallagher’s access control solutions can offer robust, high assurance certificate-based credential authentication with curb to core capabilities.
Gallagher Class 5
Beyond that, you have the highest level of protection in place where a breach could cause major or catastrophic business impacts. Class 5 solutions can be utilised by these sites that need higher levels of security; this could be prisons, financial institutions, government entities, and data centres.
The Gallagher Class 5 solution mitigates the risk of vulnerable analogue connections (resistive end of line supervision) for alarm sensors. Developed to achieve AS/NZS 2201 Class 5 intruder alarm compliance, Gallagher Class 5 Intruder Alarm System technology also meets the high security specifications of sites with equivalent standards (e.g., EN50131 grade 4) or any locations with a need to ensure edge devices are protected to a high level.
Gallagher Type 1A
Protecting sensitive information requires assured, robust alarm systems beyond enterprise products. Australian Government organisations – and those handling their information – usually require endorsed ‘Type 1A’ Security Alarm Systems to meet the Protective Security Policy Framework.
Gallagher’s Type 1A solution is engineered to ensure Australian Government sites are protected and compliant to the Type 1A 2008 alarms standard. Approved by the Security Construction and Equipment Committee (SCEC), our Type 1A solution manages alarms, monitors sensors, and defends system integrity.
To learn more about Gallagher’s High Security Solutions, visit: https://security.gallagher.com/en-AU/Australia-High-Security.